GCE MEDISELECT® II
High pressure regulator for use with medical gas cylinders equipped with a medical cylinder valve.
- Regulator with flow selector.
- Rotating pressure gauge which allows convenient reading
- 360° swivelling outlet – it enables the better orientation of the nasal cannula or oxygen mask towards the patient (preventing from twisting)
- Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas
- Lateral and frontal reading of flow settings
- The higher number of flow disc holes increases treatment options. Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation
- The additional 7 l/min is intended for nebulization
GCE Mediflow® Ultra II
Medical Low Pressure Regulator
- Built-in regulator provides a very stable and precise flow, independent of the pressure in the medical central gas system or cylinder
- Innovative self centering flow setting device with continuous flow between settings. In the unlikely event of indent mechanism failure, the patient will still be supplied by medicinal gas.
- Lateral and frontal reading of flow settings
- 360° swivelling outlet – it enables better orientation of the nasal cannula or oxygen mask towards the patient (preventing from twisting)
- Higher number of flow disc holes increases treatment options. Extra flow setting of 25 l/min on the traditional 15 l/min variant, allows use in resuscitation. The additional 7 l/min is intended for nebulization.
- Ergonomic and streamlined design
Non-Magnetic Regulator
This Regulator is constructed from entirely non-magnetic materials for use in environments that require non-magnetic devices. Each Regulator is available with international fittings, with a flow rate of either 0-15lpm or 0-25lpm through a fir tree therapy connector.
- Suitable for MRI scans
- Non-magnetic material
- Light-weight construction
- Low cost
- No calibration
